|
Clemmer excels in the manufacture of pressure vessels and related accessories. In addition to a wide range of standard carbon steel vessels, we also fabricate custom designs from Carbon Steel, Stainless Steel, Aluminum or Nickel-Based alloys in sizes up to eighteen feet in diameter and lengths in excess of seventy feet.
Using the newest welding technologies, we manufacture vessels in accordance with the latest ASME section VIII division. Vessels can be "U", "UM", or "HLW" stamped, and registered with the authority having jurisdiction or with the National Board of Boiler and Pressure Vessel inspectors.
|
|
- Clemmer Condensate Receivers are available in both vented and pressure designs in sized from 60 litre through 5000 litre. Each Condensate Receiver is manufactured using ASME materials to Clemmer quality standards and are available with an optional 1/8" (3mm) corrosion allowance.
|
- Every Condensate Receiver is meticulously inspected and tested prior to the finishing process which often may include blast cleaning and finish painting to both the inner and outer surfaces.
|
- Vented tank construction is not controlled by any outside jurisdiction, and for this reason Clemmer quality standards for fabrication meet or exceed ASME requirements.
|
|
|
Typical Vessel Sizes and Volume Table
|
